ComputerHunter.org

 

Micing a Kick Drum


This months tip deals with micing kick drums.

You wouldn't believe how many people ask me about micing their kick drums. It leads me to believe people really don't know how to.

-ON SOAPBOX-

It became so fashionable in the mid-90's through the early 2000's to use MIDI or sampled dum sounds in productions that many people now have no idea how to record a "real" drum when the "band" or "live" sound came back in.

-OFF SOAPBOX-

So, first things first. You need to make sure the actual sound source, in this case the drum, sounds as good as it can sound. You might have to "sell" the idea to the drummer that just because his drum set sounds or works a certain way in a live setting, that might, (probably) won't sound good in the studio.

One of the initial assessments you must make is determining the value of the drum. This isn't a precise science and if you are not a drummer, this probably won't be common knowledge. But it is pretty easy to learn. The next time you are in your local music store drooling over the latest TC Electronics piece, work your way over to the drum department. Pay close attention to the difference in the shells between the inexpensive sets (say $1000 or less) and the more expensive sets (those over $1000). If the shell is pure wood, like maple or birch, it typically needs less muffling in the recording process. If the shell is some type of wood or fiberglass wrap, as commonly found on less expensive kits, they normally require more muffling for recording purposes.

Less muffling usually means keeping the front (non-beater) head on. This way, the drum can vibrate fully and resonate completely. The ringing may sound like too much, but most of the ring will be lost in the mix. Again, this is a different mindset than live. In a live situation, you would want to control the ring as much as possible to avoid feedback. If you start recording and the drum is still ringing too much for your taste, start muffling a little bit at a time. A thin blanket laid inside the drum will usually do the trick.

With less expensive drums that need more muffling, take the front head completely off or at least make sure that there is a good size mic hole cut into the head. Muffle with pillows and/or blankets. There are beater, or back, heads that come pre-muffled. If possible, use a head that is not muffled. These muffled heads work great in a live setting but do not give you as much control in the studio. Add or take away muffling as needed. Keep this in mind, though, although much of the ringing will still be lost in the mix, the tone that an inexpensive shell puts out is not nearly as "sweet" as a better shell. It is usually in your best interest as an engineer to cut as much of this ring without losing all of the tone.

The second aspect of micing a kick drum is the mic itself. Usually, a dynamic mic with the largest diaphragm you can find is the best bet. My all-time favorite mic for kick drums is the EV RE20. This mic is fairly expensive for a dynamic mic, though, and many home studios do not have them in their mic aresenal. The AKG D112 is a good choice. Sennheiser has its E series that is pretty good. If all else fails, you can always use a Shure SM57. You need a couple of these in your studio anyway.

The last part of micing your kick drum is the mic placement. A few inches one way or another can make or break your recording, so experiment, experiment, experiment! As a general rule, the more muffled your drum is the deeper inside the drum you want to place your mic. Start with the mic flush with the front head with the mic facing the beater and keep moving the mic further and further into the drum until you get the perfect balance between tone and the "slap" or "click" of the beater.

Here are some tricks that I have personally used with good results:

- to get more "click" or beater sound

Switch beater from cloth to wood. These can be bought at your local music store.

On top of pillows or blankets, sit a cinder block. It gave me a "punchier" sound.

Use a seperate mic in back of the kick drum by the drummer's foot facing the beater. - not enough low end

Set a chair a few feet in front of kick drum and drape a heavy blanket from the drum to the chair. (You may need to use a bit of duct tape to get the blanket to stay on the drum.) Set the mic under the chair facing the kick drum. This tends to focus the low end and let it develop a bit more before it reaches the mic.

Whew! That's alot of work, huh? Again, don't be afraid to experiment.

Philip Langlais is the founder of iKnowAudio.com, the site for affordable, practical online audio production training. We specialize in teaching you the art of digital recording, mixing, editing, mastering, how to use compressors, eq's, reverbs, etc. Visit us at http://www.iknowaudio.com.







Google News - Top Stories

Washington Post

Chances of WMD attack in big city greater: report
Reuters - 1 hour ago
WASHINGTON (Reuters) - The chances of a terror attack on a major city somewhere in the world using weapons of mass destruction are better than even, according to a task force mandated by the US Congress, The Washington Post reported in its Tuesday ...
Panel warns biological attack likely by 2013 The Associated Press
Panel Fears Use of Unconventional Weapon New York Times
Washington Post - Los Angeles Times - Global Security Newswire - TopNews
all 239 news articles


guardian.co.uk

Success of Clinton Choice Hinges on Rapport
Washington Post - 1 hour ago
In introducing his choice for secretary of state, President-elect Barack Obama said, "Hillary's appointment is a sign to friend and foe of the seriousness of my commitment to renew American diplomacy and restore our alliances.
Video: Obama Picks Gates, Clinton for Foreign Policy AssociatedPress
Obama stresses diplomacy with new national security team Los Angeles Times
TIME - AFP - Reuters - NorthJersey.com
all 3,599 news articles


Reuters South Africa

Thailand's government dissolved
Times Online - 33 minutes ago
Thailand's Constitutional Court has ordered the government to be disbanded after finding it guilty of electoral fraud. The Prime Minister, Somchai Wongsawat, has been barred from politics for five years along with the People Power Party's other top ...
Court Disbands Thailand's Ruling Party Voice of America
Thai Court Rules to Disband Ruling Party, Somchai Out (Update2) Bloomberg
BBC News - The Associated Press - Aljazeera.net - AFP
all 401 news articles


Boston Globe

Georgia votes in key Senate run-off election
Reuters - 46 minutes ago
By Matthew Bigg DULUTH, Georgia (Reuters) - The US state of Georgia votes in a run-off election for US Senate on Tuesday that will help decide whether Democrats gain a big enough majority in the chamber to ram through legislation virtually at will.
Video: Ga. Senate Race Last Big Contest of 2008 AssociatedPress
Outsiders Look to Sway Georgia Race With Ads, Manpower Wall Street Journal
Los Angeles Times - Boston Globe - TIME - Gainesville Times
all 1,281 news articles


CTV.ca

India Terror Attacks Won't Hurt Economy, Goldman Says (Update1)
Bloomberg - 1 hour ago
By Cherian Thomas Dec. 2 (Bloomberg) -- India's economy may outperform expectations as long as relations with neighboring Pakistan aren't derailed by last week's terrorist attacks on Mumbai, said Jim O'Neill, chief economist at Goldman Sachs Group Inc.
Video: Bodies Removed From Mumbai Hotel AssociatedPress
India asks Pakistan to hand over suspects AFP
Wall Street Journal - United Press International - The Associated Press - Washington Post
all 3,858 news articles

Google
 

Copyright © 2006 Computer Hunter - A Division of Arthur´s Job Base